LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> SEATS (SERVICE INFORMATION) (1 of 2) (HYBRID) >> Lumbar Switch >> Inspection [02/2014 - ] >> Procedure

Inspection [02/2014 - ]: Procedure

  1. INSPECT POWER SEAT SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY450068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Hold Switch
      *b Release Switch
      *c Component without harness connected
      (Power Seat Switch Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Hold switch pressed Below 1 Ω
      3 - 5
      1 - 2 Off
      2 - 3
      1 - 5 Release switch pressed
      2 - 3

      If the result is not as specified, replace the power seat switch assembly.

scientia non olet · About LEMON Manuals