LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> SEATS (SERVICE INFORMATION) (1 of 2) (HYBRID) >> Lumbar Support Adjuster Assembly >> Installation [11/2016 - ] >> Procedure

Installation [11/2016 - ]: Procedure

  1. INSTALL FRONT SEATBACK HOOK 

    Refer to PROCEDURE - Step 20

  2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. Engage the 2 guides to install the lumbar support adjuster assembly to the front seatback frame sub-assembly.
      GTY740067Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws.
    3. Engage the clamp.
      GTY728083Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the lumbar support adjuster assembly connector.
  3. INSTALL FRONT SEATBACK EDGE PROTECTOR 

    Refer to PROCEDURE - Step 23

  4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD 

    Refer to PROCEDURE - Step 28

  5. INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY 

    Refer to PROCEDURE - Step 29

  6. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY 

    Refer to PROCEDURE - Step 30

  7. INSTALL FRONT SEAT CUSHION SHIELD 

    Refer to PROCEDURE - Step 38

  8. INSTALL FRONT SEAT INNER CUSHION SHIELD 

    Refer to PROCEDURE - Step 40

  9. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 42

  10. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 43

  11. INSTALL FRONT SEAT ASSEMBLY 

    Refer to INSTALLATION [11/2016 - ]

scientia non olet · About LEMON Manuals