LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (Hybrid) (1 Of 2) >> Back Door Closer Ecu >> Removal [02/2014 - 11/2016] >> Procedure

Removal [02/2014 - 11/2016]: Procedure

  1. REMOVE BACK WINDOW UPPER TRIM PANEL 

    See step  1

  2. REMOVE BACK DOOR TRIM COVER LH 

    See step  2

  3. REMOVE BACK DOOR TRIM COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER 

    See step  4

  5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER 

    See step  5

  6. REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER 

    See step  6

  7. REMOVE BACK DOOR TRIM PANEL ASSEMBLY 

    See step  7

  8. REMOVE MULTIPLEX NETWORK DOOR ECU 
    1. Disconnect the 2 connectors.
      GTY452999Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      GTY435736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clip and guide to remove the multiplex network door ECU.
scientia non olet · About LEMON Manuals