DTC B279C: Theft Deterrent System Presence Detection [02/2014 - 11/2016]: Procedure

1. Temporarily replace the power management control ECU with a new one.

   Refer to REMOVAL [02/2014 - 11/2016]

Result: 

NEXT 

1. Clear the DTCs.

   Powertrain > Hybrid Control > Clear DTCs 

Result: 

NEXT 

1. Check for DTCs.

   Powertrain > Hybrid Control > Trouble Codes 

   OK

   B279C is not output.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

END (POWER MANAGEMENT CONTROL ECU WAS DEFECTIVE) 

Result:  2

NG 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - 11/2016]