LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Blind Spot Monitor System - Diagnostic Codes & Circuit Tests - (Hybrid) >> Blind Spot Monitor System >> DTC C1AC2: Slave Module Horizontal Axis Misalignment [02/2014 - 11/2016] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

scientia non olet · About LEMON Manuals