LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Power Seat Switch (W/O Seat Position Memory) - Service Information - (Hybrid) >> Power Seat Switch (W/O Seat Position Memory System) >> Removal [02/2014 - ] >> Procedure

Removal [02/2014 - ]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY 

    Refer to REMOVAL [02/2014 - ]

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 6 Refer to PROCEDURE - Step 6

  3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 7 Refer to PROCEDURE - Step 7

  4. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side) 

    Refer to PROCEDURE - Step 10 Refer to PROCEDURE - Step 10

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side) 

    Refer to PROCEDURE - Step 11 Refer to PROCEDURE - Step 11

  6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB 

    Refer to PROCEDURE - Step 13 Refer to PROCEDURE - Step 13

  7. REMOVE RECLINING POWER SEAT SWITCH KNOB 

    Refer to PROCEDURE - Step 14 Refer to PROCEDURE - Step 14

  8. REMOVE FRONT POWER SEAT SWITCH 
    1. Remove the 3 screws and front power seat switch from the front seat cushion shield.
      GTY429731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals