LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Power Seat Switch (W/ Seat Position Memory) - Service Information - (Hybrid) >> Power Seat Switch (W/ Seat Position Memory System) >> Removal [02/2014 - 11/2016] >> Procedure

Removal [02/2014 - 11/2016]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY (for Driver Side) 

    Refer to REMOVAL [02/2014 - ]

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 6

  3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 7

  4. REMOVE FRONT SEAT CUSHION SHIELD 

    Refer to PROCEDURE - Step 10

  5. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB 

    Refer to PROCEDURE - Step 13

  6. REMOVE RECLINING POWER SEAT SWITCH KNOB 

    Refer to PROCEDURE - Step 14

  7. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY 
    1. Remove the 3 screws and position control ECU and switch assembly from the front seat cushion shield.
      GTY429732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals