DTC C1610: Camera ECU Malfunction [11/2016 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2016 - ]

   Chassis > Panoramic View Monitor > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Chassis > Panoramic View Monitor > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

GO TO PANORAMIC VIEW MONITOR SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2016 - ] 

Result:  1

OK 

See step  2

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2016 - ]

   Body Electrical > Navigation System > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Body Electrical > Navigation System > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

END 

Result:  2

NG 

REPLACE NAVIGATION RECEIVER ASSEMBLY. Refer to  REMOVAL [02/2014 - ]