LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Hybrid) >> High Mounted Stop Light Assembly >> Inspection [02/2014 - ] >> Procedure

Inspection [02/2014 - ]: Procedure

  1. INSPECT CENTER STOP LIGHT ASSEMBLY 
    1. Apply auxiliary battery voltage to the center stop light assembly and check that the light comes on.
      GTY574523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Center Stop Light Assembly)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 2 (B)
      Auxiliary battery negative (-) → Terminal 1 (E)
      Center stop light comes on

      If the result is not as specified, replace the center stop light assembly.