LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Hybrid) >> Daytime Running Light Assembly >> Inspection [02/2014 - 11/2016] >> Procedure

Inspection [02/2014 - 11/2016]: Procedure

  1. INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH 
    1. Apply auxiliary battery voltage to the daytime running light assembly LH and check that the light comes on.
      GTY430333Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Daytime Running Light Assembly LH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 1 (E)
      Auxiliary bottega negative (-) → Terminal 2 (B)      		 Daytime running light LH comes on

      If the result is not specified, replace the daytime running light assembly LH.

  2. INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH 
    1. Apply auxiliary battery voltage to the daytime running light assembly RH and check that the light comes on.
      GTY430333Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Daytime Running Light Assembly RH)

      OK

      Condition Specified Condition
      Auxiliary bottega positive (+) → Terminal 1 (E)
      Auxiliary bottega negative (-) → Terminal 2 (B)      		 Daytime running light RH comes on

      If the result is not specified, replace the daytime running light assembly RH.

scientia non olet · About LEMON Manuals