LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter / Clock (Service Information) (Hybrid) >> Combination Meter >> Installation [02/2014 - ] >> Procedure

Installation [02/2014 - ]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the 2 connectors.
    2. Engage the 2 clips as shown in the illustration.
      GTY423516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the combination meter assembly with the 2 screws.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. Engage the 2 guides and 9 claws as shown in the illustration.
      GTY423515Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 guides and 4 clips to install the instrument cluster finish panel assembly as shown in the illustration.
      GTY423619Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [02/2014 - 11/2016] Refer to INITIALIZATION [11/2016 - ]

  4. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 71 Refer to PROCEDURE - Step 72 Refer to PROCEDURE - Step 70

  5. INSTALL DECK BOARD ASSEMBLY 

    Refer to PROCEDURE - Step 72 Refer to PROCEDURE - Step 73 Refer to PROCEDURE - Step 71

scientia non olet · About LEMON Manuals