How To Proceed With Troubleshooting [02/2014 - ]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
Result:
NEXT
See step 2
- CUSTOMER PROBLEM ANALYSIS
Result:
NEXT
See step 3
- INSPECT AUXILIARY BATTERY VOLTAGE
- Measure the auxiliary battery voltage with the power switch off.
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
Result:
NEXT
See step 4
- Measure the auxiliary battery voltage with the power switch off.
- PROBLEM SYMPTOM CONFIRMATION
Result:
NEXT
See step 5
- PROBLEM SIMULATION
Result:
NEXT
See step 6
- PROBLEM SYMPTOMS TABLE
- Refer to Problem Symptoms Table.
Refer to PROBLEM SYMPTOMS TABLE [02/2014 - ]
Result:
NEXT
See step 7
- Refer to Problem Symptoms Table.
- REPAIR OR REPLACE
Result:
NEXT
See step 8
- CONFIRMATION TEST
Result:
NEXT
END