Data List / Active Test [02/2014 - 11/2016]

HINT: 

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body or Back Door / Data List.
5. Read the Data List according to the display on the Techstream.

   Body Electrical > Main Body > Data List 

   Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
   ACC SW	Power switch ACC signal	ON or OFF	ON: Power switch on (ACC) OFF: Power switch off	"ON" is also displayed for this item when the power switch is on (IG).
   IG SW	Power switch ON signal	ON or OFF	ON: Power switch on (IG) OFF: Power switch off	"OFF" is also displayed for this item when the power switch is on (ACC).
   RR Door Courtesy SW	Rear door courtesy light switch assembly RH signal	ON or OFF	ON: Rear door RH open OFF: Rear door RH closed	-
   RL Door Courtesy SW	Rear door courtesy light switch assembly LH signal	ON or OFF	ON: Rear door LH open OFF: Rear door LH closed	-
   Back Door Courtesy SW	Back door courtesy light switch signal	ON or OFF	ON: Back door open OFF: Back door closed	-
   Glass Hatch Courtesy Switch	Back door glass courtesy light switch signal	ON or OFF	ON: Glass hatch open OFF: Glass hatch closed	-
   FR Door Lock Pos	Front door RH unlock detection switch signal	LOCK or UNLOCK	LOCK: Front door RH locked UNLOCK: Front door RH unlocked	-
   FR Door Courtesy SW	Front door courtesy light switch assembly RH signal	ON or OFF	ON: Front door RH open OFF: Front door RH closed	-
   FL Door Lock Pos	Front door LH unlock detection switch signal	LOCK or UNLOCK	LOCK: Front door LH locked UNLOCK: Front door LH unlocked	-
   FL Door Courtesy SW	Front door courtesy light switch assembly LH signal	ON or OFF	ON: Front door LH open OFF: Front door LH closed	-
   RR-Door Lock Pos SW	Rear door RH unlock detection switch signal	ON or OFF	ON: Rear door RH unlocked OFF: Rear door RH locked	-
   RL-Door Lock Pos SW	Rear door LH unlock detection switch signal	ON or OFF	ON: Rear door LH unlocked OFF: Rear door LH locked	-
   Interior Light Control	Operation of the illuminated entry system	OFF or ON	Customized value is displayed	Displayed only when All Data is selected.
   I/L ON W/Door Key Unlock	Function that lights up the interior lights when the doors are unlocked	OFF or ON	Customized value is displayed	Displayed only when All Data is selected.
   Lighting Time	Lighting time of the delay control function (illuminated entry system)	15s, 7.5s or 30s	Customized value is displayed	Displayed only when All Data is selected.
   Room Light when Aprchd	Function that lights up the interior lights when a key enters any actuation area	OFF or ON	Customized value is displayed	Displayed only when All Data is selected.
   I/L when ACC OFF	Function that lights up the interior lights when the power switch is turned from on (ACC or IG) to off	OFF or ON	Customized value is displayed	Displayed only when All Data is selected.
   Light Control	Function that lights up the ambient lights (while driving)*	OFF or ON	Customized value is displayed	Displayed only when All Data is selected.
   Interior Illumination Light	Function that lights up the ambient lights (always)*	OFF or ON	Customized value is displayed	Displayed only when All Data is selected.
   *: w/ Ambient Light

   Body Electrical > Back Door > Data List 

   Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
   Courtesy SW	Back door courtesy light switch signal	ON or OFF	ON: Back door open OFF: Back door closed	-

HINT: 

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body or Smart Key / Active Test.
5. Perform the Active Test according to the display on the Techstream.

   Body Electrical > Main Body > Active Test 

   Tester Display	Measurement Item	Control Range	Diagnostic Note
   Illuminated Entry System	Turns on the lights that are controlled by the illuminated entry system*1	ON or OFF	Perform the Active Test with interior light DOOR switch in the map light assembly turned on.
   Relay for Interior Light Auto Cut Function	DOME CUT relay	ON or OFF	When performing this Active Test, turn on each interior lights. ON: DOME CUT relay off (interior lights turn off) OFF: DOME CUT relay on (interior lights turn on)
   Interior Illumination Light1	Ambient lights*2	ON or OFF	Precondition for using the Active Test to turn lights on and off: Power switch is turned off just before performing the Active Test. Preconditions for using the Active Test to check dimmer controlled illumination: Shift lever is in any position other than P.
   *1: Refer to Description for the lights that are controlled by the illuminated entry system. Refer to DESCRIPTION  *2: w/ Ambient Light

   Body Electrical > Smart Key > Active Test 

   Tester Display	Measurement Item	Control Range	Diagnostic Note
   Power/Engine SW Light	Power switch illumination	OFF or ON	When performing this Active Test, make sure the following condition is met: The power switch illumination is off (15 seconds or more have elapsed since it turned from on to off) and the power switch is on (ACC, IG, READY).