DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Engine ECU Communication; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication; DTC U0293: HV ECU Communication [02/2014 - 11/2016]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [02/2014 - 11/2016]

   Body Electrical > Navigation System > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Body Electrical > Navigation System > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - 11/2016] 

Result:  2

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - 11/2016]