DTC U1000: CAN Communication Failure (Message Registry) [02/2014 - 11/2016]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: System Select / Health Check.
5. Check for DTCs.

   Result

   Result	Proceed to
   DTC U1000 only is output	A
   DTCs other than U1000 are output	B

Result:  1

A 

REPLACE LANE DEPARTURE WARNING CAMERA. Refer to  REMOVAL [02/2014 - 11/2016] 

Result:  2

B 

GO TO OTHER DTC CHART