DTC U0233: Lost Communication with Blind Spot Monitor Master Module [02/2014 - 11/2016]: Description
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| U0233 | Lost Communication with Blind Spot Monitor Master Module | No communication from the blind spot monitor sensor LH continues. |
|
HINT: The power management control ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 11. |
HINT:
This diagnosis procedure is for when DTC U0233 is output by the power management control ECU (Techstream display: PM1 Gateway).