Yaw Rate Sensor Communication Stop Mode [02/2014 - 11/2016]: Description

Detection Item	Symptom	Trouble Area
Yaw Rate Sensor Communication Stop Mode	Either condition is met: "Yaw Rate Sensor" is not displayed on the CAN Bus Check screen of the Techstream Refer to PROBLEM SYMPTOMS TABLE [02/2014 - 11/2016] Communication system DTCs (DTCs that start with U) that correspond to "Yaw Rate Sensor Communication Stop Mode" in "DTC Combination Table" are output Refer to DIAGNOSIS SYSTEM [02/2014 - 11/2016]	Yaw rate sensor assembly branch line or connector Power source circuit of yaw rate sensor assembly Yaw rate sensor assembly ground circuit Yaw rate sensor assembly