LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Park Assist & Monitoring System (Service Information) (Hybrid) >> Clearance Warning Buzzer >> Removal [02/2014 - ] >> Procedure

Removal [02/2014 - ]: Procedure

  1. REMOVE COMBINATION METER ASSEMBLY 

    Refer to REMOVAL [02/2014 - ]

  2. REMOVE NO. 1 CLEARANCE WARNING BUZZER 
    1. Disconnect the connector.
      GTY450019Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp to remove the No. 1 clearance warning buzzer.
scientia non olet · About LEMON Manuals