Removal [08/2013 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [08/2013 - 08/2016] Refer to REMOVAL [08/2016 - ]
- REMOVE FUEL SENDER GAUGE ASSEMBLY
- Disconnect the fuel sender gauge assembly connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
NOTE:
Do not damage the wire harness.
- Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
NOTE:
Make sure that the fuel sender gauge arm does not bend.