LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Corolla S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission (U341E) (Service Information)) >> Valve Body Assembly >> Reassembly [08/2013 - 08/2016] >> Procedure

Reassembly [08/2013 - 08/2016]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL NO. 3 SOLENOID LOCK PLATE 
    1. Coat the shift solenoid valve SLT and shift solenoid valve ST with ATF.
      GTY436621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 3 Solenoid Lock Plate
      *2 Shift Solenoid Valve ST
      *3 Shift Solenoid Valve SLT
      *4 No. 1 Solenoid Lock Plate
    2. Install the shift solenoid valve SLT and No. 1 solenoid lock plate to the transmission valve body assembly.
    3. Install the shift solenoid valve ST and No. 3 solenoid lock plate to the transmission valve body assembly with the 2 bolts.

      Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

  2. INSTALL SHIFT SOLENOID VALVE SLU 
    1. Coat the shift solenoid valve SLU with ATF.
      GTY453858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve SLU and No. 2 solenoid lock plate to the transmission valve body assembly with the bolt.

      Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

  3. INSTALL SHIFT SOLENOID VALVE S2 
    1. Coat the shift solenoid valve S2 with ATF.
      GTY455631Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve S2 to the transmission valve body assembly with the bolt.

      Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

  4. INSTALL SHIFT SOLENOID VALVE S1 
    1. Coat the shift solenoid valve S1 with ATF.
      GTY447969Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve S1 to the transmission valve body assembly with the bolt.

      Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

scientia non olet · About LEMON Manuals