LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Corolla S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Continuously Variable Transaxle - Diagnostic Codes (2 Of 3) (Model Code: ZRE172)) >> Continuously Variable Transaxle System >> DTC P282B: Pressure Control Solenoid "K" Electrical (Shift Solenoid Valve SLS) [08/2014 - ] >> Description

DTC P282B: Pressure Control Solenoid "K" Electrical (Shift Solenoid Valve SLS) [08/2014 - ]: Description

WARNING: This page is about a different variant/trim than selected.

According to current control by the ECM, the shift solenoid valve SLS controls secondary pulley pressure and belt clamping pressure in accordance with the input shaft torque.

Fig 1: Shift Solenoid Valve SLS
GTY451236Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P282B Pressure Control Solenoid "K" Electrical (Shift Solenoid Valve SLS)
  1. Diagnosis Condition
    • The vehicle is being driven.
  2. Malfunction Status
    • An open or short circuit in the shift solenoid valve SLS circuit is detected.
  3. Malfunction Time
    • 1 second or more
  4. Other
    • 1 trip detection logic
  • Wire harness or connector
  • Continuously variable transaxle assembly (Shift solenoid valve SLS)
  • ECM
 Comes on DTC stored
scientia non olet · About LEMON Manuals