LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Corolla S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Continuously Variable Transaxle - Diagnostic Codes (2 Of 3) (Model Code: ZRE172)) >> Continuously Variable Transaxle System >> DTC P2822: Pressure Control Solenoid "J" Electrical (Shift Solenoid Valve SLP) [08/2013 - 08/2014] >> Description

DTC P2822: Pressure Control Solenoid "J" Electrical (Shift Solenoid Valve SLP) [08/2013 - 08/2014]: Description

WARNING: This page is about a different variant/trim than selected.

According to current control by the ECM, the shift solenoid valve SLP controls primary pulley pressure in accordance with the requested gear ratio to perform gear ratio changes.

Fig 1: Shift Solenoid Valve SLP
GTY435025Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P2822 Pressure Control Solenoid "J" Electrical (Shift Solenoid Valve SLP)
  1. Diagnosis Condition
    • The vehicle is being driven.
  2. Malfunction Status
    • An open or short in the shift solenoid valve SLP circuit is detected.
  3. Malfunction Time
    • 1.049 seconds or more
  4. Other
    • 1 trip detection logic
  • Wire harness or connector
  • Continuously variable transaxle assembly (Shift solenoid valve SLP)
  • ECM
 Comes on DTC stored
scientia non olet · About LEMON Manuals