DTC P1589: Acceleration Sensor Learning Value [08/2013 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The ECM stores DTC P1589 if deceleration sensor zero point calibration is not performed or failed after system components such as the ECM are replaced.
| DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
Memory |
| P1589 |
Acceleration Sensor Learning Value |
- Diagnosis Condition
- The vehicle speed is 2 km/h (1.2 mph) or more.
- Malfunction Status
- Deceleration sensor zero point calibration has not been completed.
- Malfunction Time
- Other
- Diagnosis Condition
- Deceleration sensor zero point calibration is performed.
- Malfunction Status
- The learned values of deceleration sensor zero point calibration are abnormal (out of normal range).
- Malfunction Time
- Other
|
- Deceleration sensor zero point calibration has not been performed
- Vehicle was not stabilized during deceleration sensor zero point calibration
- Airbag sensor assembly (Yaw rate and acceleration sensor)
- ECM
|
Does not come on |
DTC stored |