DTC P1550-P1552; Battery Current Sensor Circuit [08/2013 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The battery current sensor built into the generator control ECU assembly detects the amount of charge/discharge current. The generator control ECU assembly sends voltage generation instructions to the generator assembly based on these signals.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P1550 | Battery Current Sensor Circuit | Difference between the maximum and minimum current values of the battery current sensor is less than 1 A for 10 seconds or more with the ignition switch ON (1 trip detection logic) |
|
Does not come on | DTC stored |
| P1551 | Battery Current Sensor Circuit Low | Battery current sensor output value is abnormally low for 30 seconds or more with the ignition switch ON (1 trip detection logic) |
|
Does not come on | DTC stored |
| P1552 | Battery Current Sensor Circuit High | Battery current sensor output value is abnormally high for 30 seconds or more with the ignition switch ON (1 trip detection logic) |
|
Does not come on | DTC stored |