LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Corolla S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Control System (2ZR-FAE) - Diagnostic Codes (8 Of 8) & Symptom Tests (Model Code: ZRE172)) >> SFI System >> Circuit Tests >> ECM Power Source Circuit [08/2013 - ] >> Description

ECM Power Source Circuit [08/2013 - ]: Description

WARNING: This page is about a different variant/trim than selected.

When the ignition switch is turned to ON, the battery voltage is applied to IGSW of the ECM. The output signal from the MREL terminal of the ECM causes a current to flow to the coil, closing the contacts of the EFI-MAIN relay and supplying power to terminal is +B and +B2 of the ECM.