LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Corolla S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Starting System (2ZR-FAE) (Service Information) (Model Code: ZRE172)) >> Engine Switch >> Removal [08/2016 - ] >> Procedure

Removal [08/2016 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 3 Refer to PROCEDURE - Step 3

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8 Refer to PROCEDURE - Step 8

  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 9 Refer to PROCEDURE - Step 9

  4. REMOVE NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 7

  5. REMOVE ENGINE SWITCH 
    1. Disengage the 2 claws and remove the engine switch.
      GTY434663Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals