LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Corolla S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Emission Control System (2ZR-FAE) (Service Information) (Model Code: ZRE172)) >> PCV Valve >> Removal [08/2013 - ] >> Procedure

Removal [08/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [08/2013 - ]

  2. REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. Slide the clip and disconnect the No. 1 ventilation hose from the PCV valve (ventilation valve sub-assembly).
      GTY433778Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a ball joint lock nut wrench (22 mm), remove the PCV valve (ventilation valve sub-assembly) from the ventilation case.
      GTY452637Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals