DTC B2336: Immobiliser Communication ID Unmatched [08/2015 - ]: Procedure

REGISTER REMOTE ENGINE STARTER ID
1. Register the remote engine starter ID. Refer to REGISTRATION [08/2015 - ] .
NEXT: Go to next step
CHECK DTC OUTPUT
1. Clear the DTC. Refer to DTC CHECK / CLEAR [08/2015 - ] .
2. Perform the remote engine starter operation.
3. Check for DTCs.
  OK
  
  DTC B2336 is not output.
NG → See step 3

OK → END (REMOTE ENGINE STARTER ID WAS NOT REGISTERED CORRECTLY)
REPLACE REMOTE ENGINE STARTER ECU
1. Temporarily replace the remote engine starter ECU with a new one. Refer to REMOVAL [08/2015 - ] .
NEXT: Go to next step
REGISTER REMOTE ENGINE STARTER ID
1. Register the remote engine starter ID. Refer to REGISTRATION [08/2015 - ] .
NEXT: Go to next step
CHECK DTC OUTPUT
1. Clear the DTC. Refer to DTC CHECK / CLEAR [08/2015 - ] .
2. Perform the remote engine starter operation.
3. Check for DTCs.
  OK
  
  DTC B2336 is not output.
NG → See step 6

OK → END (REMOTE ENGINE STARTER ECU WAS DEFECTIVE)
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to REMOVAL [08/2015 - ]