Removal [08/2015 - ]

HINT: 

• Use the same procedure for the RH and LH sides.
• The procedure described below is for the LH side.

1. REMOVE OUTER MIRROR  . Refer to REMOVAL [08/2015 - ] - Step 1
2. REMOVE OUTER MIRROR COVER  . Refer to REMOVAL [08/2015 - ] - Step 2
3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY 
   1. Disengage the 2 claws.
      Fig 1: Identifying Side Turn Signal Light Assembly

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Disconnect the connector and remove the side turn signal light assembly.