LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Monitor System (Diagnostic Codes (C1A45-U1331) & Circuit Tests) (Except Hybrid) >> Blind Spot Monitor System >> DTC C1AC1: Master Module Horizontal Axis Misalignment [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:

When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

scientia non olet · About LEMON Manuals