Inspection [10/2015 - ]: Procedure
- INSPECT FRONT SEAT OUTER BELT ASSEMBLY
- Before installing the front seat outer belt assembly, check the ELR function.NOTE:
Do not disassemble the retractor.
- When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.TEXT IN ILLUSTRATION
*1 Retractor *a Unlocked *b Locked *c 45° If the result is not as specified, replace the outer belt assembly.
- When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
- Before installing the front seat outer belt assembly, check the ELR function.