LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Avalon XLE >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> Front Seat Inner Belt Assembly >> Inspection [10/2014 - ] >> Procedure

Inspection [10/2014 - ]: Procedure

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (w/ Seat Position Memory System) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY363526Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      5 - 6 Driver seat belt unfastened 10 kΩ or higher
      5 - 6 Driver seat belt fastened Below 1 Ω
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Front Seat Inner Belt Assembly LH)

      If the result is not as specified, replace the front seat inner belt assembly LH.

scientia non olet · About LEMON Manuals