LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Avalon XLE >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> Child Restraint Seat Anchor Bracket >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH 
    1. Install the child restraint seat anchor bracket sub-assembly LH with the 2 nuts.

      Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

  2. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH 
    1. Install the child restraint seat anchor bracket sub-assembly RH with the 2 nuts.

      Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

  3. INSTALL REAR SEAT ASSEMBLY 

    (Refer to INSTALLATION [10/2014 - ] )

scientia non olet · About LEMON Manuals