Disassembly [10/2014 - ]: Procedure

REMOVE FRONT DISC BRAKE PISTON

Place a piece of cloth between the front disc brake piston and front disc brake cylinder assembly.

Apply compressed air to remove the front disc brake piston from the front disc brake cylinder assembly.

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

WARNING:

Do not place your fingers in front of the front disc brake piston when using compressed air.

NOTE:

Do not allow any brake fluid to spatter.

REMOVE CYLINDER BOOT

Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the front disc brake cylinder.

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

TEXT IN ILLUSTRATION

*1	Protective Tape

NOTE:

Be careful not to damage the front disc brake cylinder.

REMOVE PISTON SEAL

Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder.

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

TEXT IN ILLUSTRATION

*1	Protective Tape

NOTE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.