DTC C1626: Steering Angle Sensor Failure [10/2014 - ]: Procedure

1. Replace the steering sensor with a new or known good one (Refer to REMOVAL [10/2014 - ] ).

Result: 

NEXT 

See step  2

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Recheck for DTCs and check that no DTCs are output (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   Result

   Result	Proceed to
   DTC C1626 is output	A
   DTC C1626 is not output	B

Result: 

A 

REPLACE REAR TELEVISION CAMERA ASSEMBLY 

(Refer to REMOVAL [10/2014 - ] )

Result: 

B 

END