Caution / Notice / Hint

NOTE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

HINT:

Refer to inspection procedure for CAN communication system.
If the CAN communication malfunctions, the TCM cannot receive the current data from the ECM. In this case, the freeze frame data output from the TCM has not been updated, so the data will not be useful for the inspection. However, reading the Data List as the first step in troubleshooting is effective to find malfunctions.
The malfunction area can be checked using the Bus Check function on the Techstream.
w/o Central Gateway ECU: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ]

w/ Central Gateway ECU: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ]