LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Avalon XLE Plus >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) (Except Hybrid) >> Washer Nozzle >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY 
    1. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
      GTY382283Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Protective Tape
      NOTE:

      Be careful not to damage the windshield.

      HINT: 

      Tape the screwdriver tip before use.

    2. Disconnect the washer hose to remove the washer nozzle sub-assembly.
      GTY382600Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Washer nozzle sub-assemblies cannot be reused.

scientia non olet · About LEMON Manuals