LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Avalon XLE Plus >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) (Except Hybrid) >> Washer Nozzle >> Adjustment [10/2014 - ] >> Procedure

Adjustment [10/2014 - ]: Procedure

  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    See step  1

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY 
    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.
      GTY366451Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Washer Fluid Spray Angle *b Part Number
  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY 

    See step  1

scientia non olet · About LEMON Manuals