Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
One of the following conditions is met: Condition (A), (B) or (C)
CONDITION (A)
| When one of following conditions is met | Condition (1), (2) or (3) |
| - Condition (1) and (2): Output duty cycle | 100% or more |
| - Condition (3): Output duty cycle | 0% or less |
CONDITION (B)
| Solenoid voltage monitor | No signal |
CONDITION (C)
| Difference between target voltage and average of monitor voltage | 0.035 V or higher |