DTC P0778: Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2) [08/2015 - 08/2019]: Description
WARNING: This page is about a different variant/trim than selected.
Shifting from 1st to 5th is performed in combination with the ON and OFF operation of the shift solenoid valves SL1, SL2, S1, S2 and SR, which are controlled by the ECM. If an open or short circuit occurs in one of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Refer to FAIL-SAFE CHART [08/2015 - ] ).
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0778 | The ECM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears (1-trip detection logic). Output signal duty ratio equals 100%. HINT: SL2 output signal duty is less than 100% under normal conditions. |
|