Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
[ON malfunction]
- Both of the following conditions are met:
ON malfunction (A) and (B), or ON malfunction (C)
ON malfunction (D) or (E)
ON MALFUNCTION (A)
| Turbine speed/Output speed (NT/NO) | 3.30 or more, and 7.50 or less (This means actual gear is 1st) |
ON MALFUNCTION (B)
| Turbine speed/Output speed (NT/NO) | 1.28 or more, and 1.53 or less (This means actual gear is 3rd) |
ON MALFUNCTION (C)
| Turbine speed/Output speed (NT/NO) | 0.93 or more, and 1.07 or less (This means actual gear is 4th) |
ON MALFUNCTION (D)
| Turbine speed - Output speed x 4th gear ratio (NT - NO x 4th gear ratio) |
1000 rpm or more |
ON MALFUNCTION (E)
| Turbine speed - Output speed x 5th gear ratio (NT - NO x 5th gear ratio) |
1000 rpm or more |