DTC P0751: Shift Solenoid "A" Performance (Shift Solenoid Valve S1) [08/2015 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The ECM uses signals from the output shaft speed sensor and input speed sensor to detect the actual gear position (1st, 2nd, 3rd, 4th or 5th gear).
Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of the shift solenoid valves, valve body or automatic transmission (clutch, brake, gear, etc.).
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0751 | Gear required by the ECM does not match the actual gear when driving (2-trip detection logic). |
|