Monitor Description
WARNING: This page is about a different variant/trim than selected.
This DTC indicates a problem with the park/neutral position switch and wire harness in the park/neutral position switch circuit.
The park/neutral position switch detects the shift lever position (P, R, N, D or S) and sends a signal to the ECM.
For security, the park/neutral position switch detects the shift lever position so that the engine can be started only when the shift lever is in P or N.
The ECM determines that there is a problem with the switch or related parts if it receives more than 1 position signal simultaneously. The ECM will illuminate the MIL and store the DTC.