LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case (VF2BM) - Service Information) >> Transfer Indicator Switch >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL NO. 1 TRANSFER INDICATOR SWITCH (4WD POSITION) 
    1. Install a new gasket and the No. 1 transfer indicator switch.

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

  2. INSTALL NO. 1 TRANSFER INDICATOR SWITCH (L4 POSITION) 
    1. Install a new gasket and the No. 1 transfer indicator switch.

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

  3. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER 

    (Refer to INSTALLATION [08/2015 - 08/2019] )

scientia non olet · About LEMON Manuals