LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case (VF2BM) - Service Information) >> Transfer Assembly >> Removal [08/2015 - 08/2019] >> Procedure

Removal [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. DRAIN TRANSFER OIL 
  2. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER 

    (Refer to REMOVAL [08/2015 - 08/2019] )

  3. REMOVE TRANSFER ASSEMBLY 
    GTY369185Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 8 bolts.
    2. Pull the transfer assembly straight up and remove it from the automatic transmission.
      NOTE:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.