LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case (VF2BM) - Service Information) >> Transfer Assembly >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSFER ASSEMBLY 
    1. Install the transfer assembly with the 8 bolts.

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

      NOTE:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER 

    (Refer to INSTALLATION [08/2015 - 08/2019] )

  3. ADD TRANSFER OIL 

    See step  2

  4. CHECK FOR TRANSFER OIL LEAK 
scientia non olet · About LEMON Manuals