LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case (VF2A) - Service Information) >> Transfer Indicator Switch >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSFER INDICATOR SWITCH (4WD POSITION) 
    1. Using SST, install a new gasket and the indicator switch.
      • SST: 09817-16011 

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

  2. INSTALL TRANSFER INDICATOR SWITCH (L4 POSITION) 
    1. Using SST, install a new gasket and the indicator switch.
      • SST: 09817-16011 

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

  3. INSTALL TRANSFER INDICATOR SWITCH (NEUTRAL POSITION) 
    1. Using SST, install a new gasket and the indicator switch.
      • SST: 09817-16011 

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

  4. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER 
    1. Install the automatic transmission (Refer to INSTALLATION [08/2015 - 08/2019] , or refer to INSTALLATION [08/2019 - ] ).
scientia non olet · About LEMON Manuals