LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission System (A750E) - Service Information) >> Speed Sensor >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL SPEED SENSOR SP2 
    1. Coat a new O-ring with ATF and install it to the sensor.
    2. Install the sensor with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    3. Connect the sensor connector.
  2. INSTALL SPEED SENSOR NT 
    1. Coat a new O-ring with ATF and install it to the sensor.
    2. Install the sensor with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    3. Connect the sensor connector.
scientia non olet · About LEMON Manuals