Inspection [08/2015 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- INSPECT SPEED SENSOR NT AND SP2
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
560 to 680 Ω |
TEXT IN ILLUSTRATION
| *a |
Component without harness connected
(Speed Sensor) |
If the result is not as specified, replace the sensor.