DTC U0416: Invalid Data Received From Vehicle Dynamics Control Module [08/2019 - ]: Procedure
WARNING: This page is about a different car, the 2024 Toyota 4Runner, 2023 Toyota 4Runner, 2022 Toyota 4Runner, 2021 Toyota 4Runner, and 2020 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- RECONFIRM DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [08/2019 - ]
- Check if the same DTCs are output.
Refer to DTC CHECK / CLEAR [08/2019 - ]
Result
Result Proceed to DTC U0122 and U0416 are output A Only DTC U0416 is output B DTC is not output C
Result:
A
GO TO U0122. Refer to DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2019 - ]
Result:
B
CHECK BRAKE CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ]
Result:
C
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]
- Clear the DTCs.